Mixer Counter-current plastic mixer or plastic mixer: The mixer is suitable for mixing powdered resin molding materials, and can also be used for mixing liquid resin molding materials. Equipment features: The mixing is relatively uniform and loose, there are few dead ends, convenient discharging, easy to clean, high production efficiency, and the equipment is not easy to wear. On this basis, the plow board mixer appeared after improvement. The feed pot in its structure is basically the same as the counter-current type, but the stirring knife is changed to a fixed plough board, only the feed pot rotates, and the plough board has two groups, one group turns the material outward, and the other group turns the material inward. During the mixing process, the materials are continuously separated and turned. To achieve the purpose of mixing. The equipment has good mixing quality and easy operation.
Double-shaft blade plastic mixer or plastic mixer: suitable for mixing liquid resin molding materials. Equipment features: uniform mixing, loose mixture, good formability, easy discharging, less leftover, high production efficiency, but high heat generated by mixing, and fast wear of the reamer and the pot.
Roller type plastic mixer, namely plastic mixer: suitable for mixing liquid resin molding materials. Equipment characteristics: mixing is very uniform, but the time is long, the efficiency is low, the discharge is not clean, there are many dead ends, and it is not easy to clean. The counter-current wheel milling mixer is equipped with iron rollers on the counter-current mixing machine. It functions as a counter-current machine and a wheel mill at the same time, and can be used to mix liquid or powder resin molding materials.
Ball mill plastic mixer, namely plastic mixer: suitable for dry mixing of abrasive and various powdery materials. Equipment characteristics: long time mixing, extremely uniform mixture, simple equipment and easy operation.
Double-pot type plastic mixer or plastic mixer: suitable for mixing powdered resin molding materials. Equipment features: The double-boiler structure is adopted to complete the wet mixing and dry mixing in two boilers respectively, which realizes linkage and solves the inconvenience of sticking and cleaning the pot of traditional mixing equipment. The molding material does not heat up, and the mixed material Stable quality, good looseness and moldability, and no particle segregation occurs when materials with large contrast and different particle sizes are mixed, and the particles are not extruded or ground. It is an ideal equipment for mixing powdered resin molding.