Welcome to the official website of Zhangjiagang samsara Machinery Co., Ltd!
The central feeding system is designed for the production of plastic products in the injection molding workshop, realizing uninterrupted unmanned continuous molding operation. The combination and application of material types and multi-color data can be changed as required to realize the automation of coloring process. What problems will occur in the central material supply system when it is used? How to deal with it?
1、 Unable to start:
1. Check whether the progressive power supply 380V is connected and whether the switch in the electric cabinet is turned on;
2. Check whether the fuse is broken, and check the reason for it;
3. Check whether the transformer is normal;
4. Check whether the switch power supply is normal.
2、 There is suction action, but there is no suction or suction flow:
1. Check whether the air shutoff valve in the negative pressure pipeline has air leakage;
2. Check whether the filter in the pulse dust collector is blocked by dust;
3. Check whether the exhaust valve on the pulse dust collector has air leakage;
4. Check whether the upper cover of the suction bucket is closed.
3、 The suction bucket on the machine is empty, but the touch screen displays full:
1. Check whether the sensitivity of the photoelectric switch is normal and whether it is damaged;
2. Check whether the photoelectric switch is not tightened properly or the screw is not tightened;
3. Check whether the aviation plug is plugged in.
4、 The suction bucket on the machine has no material, but the touch screen displays the lack of material:
1. Check whether the sensitivity of the photoelectric switch is normal and whether it is damaged;
2. Check whether the photoelectric switch is not tightened properly or the screw is not tightened;
3. Check whether the aviation plug is plugged in.
5、 Vacuum suction bucket does not fall:
1. Open the upper cover of the suction bucket to see if the original frying pan is bridged and stuck on the blanking opening;
2. Check whether the evacuation time is too long;
3. Check whether the extraction time is too long.